Why Your Swim Spa Cover Stinks!

Hey, no offense, but your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is one of nature’s most erosive substances. Moisture seeps in and becomes trapped between the external vinyl shell and the cling wrap foam cores. The warm, damp environment is perfect for mold and mildew and other forms of foul-smelling things.
If moisture has permeated further into the cling wrap foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, but also make the cover truly hard to remove, and not as reliable at keeping the heat in the spa. Time for a much better kind of Swim Spa Cover

Stinky Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or used spots, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off properly, will ultimately begin to puddle water, which is probably time to purchase a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also problem, and although you can stave off the inescapable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can stand up to longer durations, however it’s an excellent routine to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to enable wetness to escape do so, but don’t eliminate delicate foam panels unless definitely essential.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, however it won’t stop moisture very well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the extreme moisture from your spa from reaching the foam core. The only real option is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not preserved frequently with sanitizer and filtering, or is not shocked typically enough, bacteria and algae can benefit from a congenial environment to thrive. Low pH, high chlorine or high ozone levels can likewise deteriorate the underside of your Swim Spa Cover cover. Due to the fact that the cover is so close to the spa, it absorbs the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent stinky spa covers. (Sorry but this is simply BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roof, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times annually, so that it always looks terrific, and is secured from the elements. Again, this actually isn’t really going to stop the mold and mildew from growing inside a foam cover However it will assist your spa dealership pay their bills. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your Swim Spa Cover!
• Remove to Safe Location: This initial step might seem obvious, however you require an excellent place to allow the cover to sit undisturbed from animals, wild animals, and winds. It must be a warm place if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as gentle as possible. Do not use home cleaning products on your Swim Spa Cover, unusual chemicals can end up in your spa water. Carefully clean all outside surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be avoided if possible, because the panels could end up being damaged throughout removal or cleaning. But if you determine that there is something slimy within, you can normally unzip and get rid of the panel for a cleansing inside and out.

How typically does your spa dealer expect you to do all this? If your swim spa is protected from a lot of sun and rain, two times each year. If it’s exposed it ought to be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The simplest remedy for a stinky Swim Spa Cover is to just buy a different kind of Swim Spa Cover A smelly swim spa cover simply implies that your cover is taking on moisture, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam however has sealed air chambers rather will avoid giving the mold and mildew a place to grow in the first place.