Why Your Hot Tub Cover Stinks!

Hey, no offense, however your hot tub cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is one of nature’s most erosive substances. Moisture permeates in and becomes trapped in between the external vinyl shell and the cling wrap foam cores. The warm, wet environment is best for mold and mildew and other kinds of stinky stuff.
If moisture has actually penetrated further into the plastic wrapped foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and stinky slime, but also make the cover really challenging to eliminate, and not as effective at keeping the heat in the spa. Time for a better type of hot tub cover

Stinky Hot Tub Cover?!?
• Broken or harmed. Broken foam cores, ripped or used areas, torn seams. A hot tub cover that loses it’s arched roofing line, to keep water draining pipes off properly, will eventually start to puddle water, which is most likely time to buy a brand-new hot tub cover! A spa cover with threadbare areas in the vinyl is also bad news, and although you can stave off the inevitable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your hot tub cover weekly for 2 hours of airing out. A better cover can stand up to longer durations, but it’s a great practice to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to allow moisture to escape do so, but don’t eliminate vulnerable foam panels unless absolutely necessary.

Actually, this is just hogwash. The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, hot tubs by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the hot tub.
• Poorly Made. It’s easy to make a hot tub cover with tape and staples, but it won’t stop moisture effectively. Even the very best foam filled Hot Tub Covers with vacuum-wrapped and heat bonded joint are not going to keep the extreme wetness from your spa from reaching the foam core. The only real service is a hot tub cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not shocked typically enough, bacteria and algae can make the most of a hospitable environment to thrive. Low pH, high chlorine or high ozone levels can also deteriorate the underside of your hot tub cover cover. Since the cover is so near the spa, it takes in the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry but this is simply BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Hot Tub Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roof, that can be worse than no roofing at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times each year, so that it constantly looks excellent, and is safeguarded from the components. Once again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealership pay their bills.

Your Choices

Repair Your Hot Tub Cover!
• Remove to Safe Location: This primary step might seem obvious, however you require a great location to allow the cover to sit undisturbed from family pets, wild animals, and winds. It must be a sunny area if possible, or a dry indoor place with low humidity can likewise be used.
• Deodorize & Disinfect: You may not have to do both, it’s best to be as gentle as possible. Do not use home cleaning products on your spa cover, unusual chemicals can wind up in your spa water. Carefully clean all outside surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, because the panels could become harmed during elimination or cleaning. But if you figure out that there is something slimy inside, you can typically unzip and get rid of the panel for a cleaning inside and out.

How typically does your spa dealer expect you to do all this? If your hot tub is secured from many sun and rain, twice annually. If it’s exposed it ought to be 3-4 times each year. Let that sink in a minute.

Better Choice
The easiest remedy for a foul-smelling hot tub cover is to just purchase a various type of hot tub cover A foul-smelling swim spa cover simply implies that your cover is handling wetness, and things are beginning to grow! Hot Tub Covers from SpaCap.com that does not use foam but has actually sealed air chambers instead will avoid providing the mold and mildew a location to grow in the first place.